The wood glass closet doors revive when you replace some wood by glass. Even the old cabinets look classy with the brightness of the glass showing its contents. The process is not difficult, provided you have some basic tools and a hardware store around to cut the glass; you can transform your kitchen on a day to the other. The doors easier to convert glass cabinets are panels, whether raised or flat.
Remove the glass closet doors base cabinet by removing the hinges. Desatorníllalas door like knob or lever so the door lays flat on the surface. Save the accessories to replace them later. Remove the door panel of the cabinet. Removed method depends on the way in which the door is made, but normally the panel is between the frames and glued in place. If this is the case, use a knife to cut the adhesive. You might have to cut the edge of the wood from the bottom holding the panel in place. Make a straight cut using a straight edge, taking care not to damage the frame.
12 Photos Gallery of: Style Glass Closet Doors Ideas
Measure the width and height of the opening for the glass panel and asks how many panels you need for a crazy hardware cabinets. Rounded down to the extent eighth of an inch (0.3 cm) closer. Measure each door separately and then record the width and height to order. Asks for a glass of one-eighth inch wide (0.3 cm). Place the glass in the opening at the back of the cabinet door to make sure between. Remove it and apply some clear silicone around the edge of the opening. Place the glass in place, gently pressing and centering it in the opening.
Place the glass holder in the door frame, screwing it into place with the drill. Place two at the base and at least two on each side, one in the center of the top. Replace the accessories in the cabinet door hinges and placed at the base of the cabinet. Close the glass closet doors and enjoy a clear view of your cabinet.