Making your own double closet doors to a closet can be a quick and inexpensive way to give your kitchen a touch of design without the designer cost. With some basic tools and panels of medium density fiberboard , commonly available, a new set of doors for your closet can be done in a weekend, adding style and value to your kitchen and making the money stays in your pocket.
Measure the opening of the double closet doors of your closet to determine the size of doors you need to do: add 1 inch (2.5 cm) measures. Write the measurements on a piece of paper, numbering each and every door open so you know where to go once they are completed.
12 Photos Gallery of: Making Simple Double Closet Doors
FDM short doors in 3/4 inch (1.9 cm) thick. Sand the edges to remove any mark left by the saw blade. Also sanding the edges in the back of the door where these are attached to the rear face. With the channeling, make a decorative pattern on the edges of the front face of the door, where it binds to the sides. To the smallest details, one pass is enough, but for deeper you may need a second pass.
Remove any rough edge that has left the channeling with fine sandpaper. You are not trying to erase the details, only slightly dampen the rough for the paint penetrates to the edges. It covers doors with a special basis for double closet doors. Sandpaper gently once dry basis. Apply two finish coats of paint, sanding between them with fine sandpaper.