Making a Lathe Tool Cabinet

Sep 23rd

Making a lathe tool cabinet provides easy access. It will free the workspace and drawer. These types of cabinets are 18 slots handles 18 different wood carvings. A dedicated cabinet is a very simple accessory and only a small amount of needed supplies, measuring and working time. Once the tool cabinet is finished it will be a good addition to any workplace against the wall.

Roller Tool Cabinet
Roller Tool Cabinet

Place two tables of 28 inches (70 cm) edge parallel to and 24 inches (60 cm) away. Locate two tables of 24 inches (60 cm) between them in straight and separate by 26 inches (65 cm) angles. Screwed through the first set of tablets and at the ends of the second pair. Use 8 screws for this task. This is the lathe tool cabinet frame. Make 18 holes through the last board 24 inches (60 cm) that is equal to the diameter of your lathe tools. Holes centered along the center of 3 inches (7.5) of the table and separate the holes 1 3/8 inches (3.5 cm) apart. The handles of your tools fit here. Set the table with holes between the boards 28 inches (70 cm) so that it is parallel with the other boards 24 inches (60 cm) and 6 inches (15 cm) of only one of them.

12 Photos Gallery of: Making a Lathe Tool Cabinet

Image of: Lathe tool cabinet
Image of: Lathe tool cabinet ideas
Image of: Ideas Tool Cabinet
Image of: Lathe turning tools rolling cabinet
Image of: Lathe Stand Cabinet
Image of: tool holder cabinet
Image of: lathe tool holder
Image of: Lathe Cabinet Tool
Image of: tooling storage cabinet
Image of: Lathe Stand Cabinet Tool
Image of: General 39213 Hanging Tool Cabinet
Image of: Roller Tool Cabinet