Make a Ramp for Pet Stairs

Jun 2nd

Decide the width of the ramp pet stairs, based on what size of dog. Medium breeds such as Australian Shepherds and Dobermans are more comfortable in a ramp of 24 inches wide (60 cm). Measures the appropriate width of the plywood, and cut with a sharp saw. Create a base of 8 feet (2.4 m) long for the ramp. Use the saw to cut the corresponding piece of wooden board 2×4 inches (5×10 cm). For example, if your ramp is 24 inches (60 cm) wide, measure and cut a piece of wood 24 inches (60 cm) wide.

Four Pet Stairs
Four Pet Stairs

Distribute a thin layer of carpet glue on the surface of the plywood, and cover it with a piece of carpet. This provides traction while the dog raises, and water resistant nature prevents the ramp ruin pet stairs if the dog relieves himself on her. Fold the edges of the carpet down and secure them to the bottom with staples. Use staples short , 1/4 inch (0.6 cm) to secure the carpet without piercing the timber, preventing the fucking dog.

12 Photos Gallery of: Make a Ramp for Pet Stairs

Image of: Four Pet Stairs
Image of: Three Pet Stairs
Image of: Pet Stairs Picture
Image of: Cool Pet Stairs
Image of: DIY Pet Stairs
Image of: Pet Stairs and Dog
Image of: Wood Pet Stairs
Image of: Fabric Pet Stairs
Image of: Rusbrush Fabric Pet Stairs
Image of: Smooth Pet Stairs
Image of: Beautiful Pet Stairs
Image of: Pet Stairs

Aligns small wooden block on the short side of the ramp and unite them with screws , drilling wood at an angle of 45 degrees. This will keep the wood firmly in place and anclarás ramp down the pet stairs.