Building Casper Bed Frame

Nov 4th

Casper bed frame – Making your own bed frame is a good project for newcomers to woodworking that is too little of a challenge. The bed frame uses simple dumbbells and is a durable yet appealing design. This bed will be ideal for children’s rooms or as an extra bed in the study or guest room and you can be proud to say you did it yourself.

White Casper Bed Frame
White Casper Bed Frame

Instructions

12 Photos Gallery of: Building Casper Bed Frame

Image of: White Casper Bed Frame
Image of: Simple Casper Bed Frame
Image of: Set Casper Bed Frame
Image of: Rustic Casper Bed Frame
Image of: Original Casper Bed Frame
Image of: Modern Casper Bed Frame
Image of: Home Casper Bed Frame
Image of: Design Casper Bed Frame
Image of: Casper Bed Frame Plan
Image of: Casper Bed Frame Mattress
Image of: Casper Bed Frame Amazing
Image of: Awesome Casper Bed Frame
 

Squeeze the boards in place. This is the base of the inner Casper bed frame. Slot four planks of 2.5 cm (1 inch) thick wood that measure 20 x 99 cm (8 x 39 inches) in the frame, parallel to the 99 cm (39 inch) ends of the frame. Push the two outer planks up against the ends of the frame and space the other two evenly between them. Press down all planks so that the bottom of the planks is at the same level as the lower part of the frame. These are mattress support.

Insert a corner bracket on each side of the ends of the middle two supports and in the corners of the end supports. Use 2 cm (3/4 inch) wood screws to attach the corner brackets to the frame and support the planks. Casper bed frame way the screw holes are not shown on the outside. Position two planks of 2.5 cm (1 inch) thick timber measure 10 x 81 cm (4 x 32 inches) (upper legs) and two planks measuring 10 x 56 cm (4 x 22 inches) on either side of each end of the frame. Has your assistant help you lift the frame so that it is 25 cm (10 inches) from the ground, then clamp the frame to the legs.