Bathtubs with jets – You have plenty of possibilities to incorporate their own ideas about the final look of a skirt of a hot tub or other brand of hot tub. You can end the skirt tiles or teak wood tile or higher and contrast on the sides, so the skirt as wide or as long as you want. Check local building codes if required for an access panel to the whirlpool pump; if so, you can design a skirt or attempt to hide the panel adjacent the pump end of the tub enclosure.
Sketch out his plans for the skirt bathtubs with jets completed so they have an accurate representation of their optimum height, width and depth idea. Carefully measure the thickness and materials to be used for the skirt completed, and draw and take note of all sizes, including the creation of its design is the main challenge of the project.
12 Photos Gallery of: Bathtubs with Jets Jacuzzi
Bathtubs with jets, note the thickness of marine-grade plywood on top of the skirt, typically 3/4 inch; plate concrete and cement mortar adhesive thin layer, typically 5/8 inch; and the tile and thinset, typically 3/8. If you are running the top of the skirt with other materials such as teak or corian, measure these materials and estimate the thickness of adhesive to be used.